【金钻指标】通达信【上苍之手】指标源码，精准捕捉上涨信号！支持电脑端和手机端使用

Garfield

稳定的交易模式一定是建立在当下热点题材+资金风口的基础上，公式是辅助进出的参考，决策还是在个人。

指标介绍：

今天给大家带来的是【上苍之手】指标套装，支持电脑端和手机端使用。包含1幅图、1选股，共2个指标。

指标使用说明：

• 上苍之手，经手指点的个股必将迎来一波主升浪；
• 用法上，上苍之手出股率不高可能很长时间会没有选出个股来，不要着急耐心等待上苍之手的点拨，选出的个股尽量贴合当下的题材，前面有一次完整的试盘拉升最好，前期涨幅不宜过大，均线排列整齐或年季度线走平，不能有栽头向下的，近期走势温和，量能温和；
• 当天若是涨停板买不进去，可第二天介入，前提是必须符合条件2的条件，若用于盘中实时预警，则需要有一定的买入判断力；
• 指标不含未来函数，指标不漂移。
  

出票案例贴图：

幅图源码如下：

1. 
   
2. GHC1:=MA(CLOSE,5);
   
3. GHC2:=MA(CLOSE,10);
   
4. GHC3:=MA(CLOSE,20);
   
5. GHC4:=MA(CLOSE,60);
   
6. GHC5:=MA(CLOSE,120);
   
7. GHC6:=GHC1>GHC2 AND GHC2>GHC3 AND GHC3>GHC4 AND GHC4>GHC5 AND GHC1>REF(GHC1,1) AND GHC2>REF(GHC2,1) AND GHC3>REF(GHC3,1) AND GHC4>REF(GHC4,1) AND GHC5>REF(GHC5,1);
   
8. GHC7:=ABS(REF(OPEN,1)-REF(CLOSE,1))/REF(CLOSE,1)<0.03 AND OPEN>REF(LOW,1) AND CLOSE>REF(HIGH,1) AND CLOSE/OPEN>1.04 AND CROSS(MACD.MACD,0) AND CLOSE>MA(CLOSE,5) AND GHC6 AND 8;
   
9. GHC8:=HHV(MAX(CLOSE,0),20)/LLV(MIN(CLOSE,OPEN),20)<=1.15;
   
10. GHC9:=(HIGH-CLOSE)/CLOSE*100<1;
    
11. GHC10:=CLOSE/REF(CLOSE,1)>1.038;
    
12. GHC11:=REF(CLOSE>OPEN OR OPEN>CLOSE,43) AND REF(CLOSE>OPEN OR OPEN>CLOSE,37) AND REF(CLOSE>OPEN OR OPEN>CLOSE,16) AND REF(CLOSE>OPEN OR OPEN>CLOSE,25) AND REF(CLOSE>OPEN OR OPEN>CLOSE,29) AND REF(CLOSE>OPEN OR OPEN>CLOSE,2) AND REF(CLOSE>OPEN OR OPEN>CLOSE,24);
    
13. GHC12:=GHC7 AND GHC8 AND GHC9 AND GHC10 AND GHC11;
    
14. DRAWTEXT_FIX(1,0,0.07,0,'微信公众号：指标严选'),COLORMAGENTA,LINETHICK4;
    
15. DRAWICON(FILTER(GHC12=1,3),40,11),COLORCYAN;
    
16. STICKLINE(FILTER(GHC12=1,5),36,0,3.25,0),COLORRED;
    
17. STICKLINE(FILTER(GHC12=1,5),35,0,0.35,1),COLORYELLOW;
    
18. DRAWTEXT(FILTER(GHC12=1,3),38,'? ←上帝之手'),COLORCYAN;
    

复制代码

选股源码如下：

1. XG_1:=MA(CLOSE,5);
   
2. XG_2:=MA(CLOSE,10);
   
3. XG_3:=MA(CLOSE,20);
   
4. XG_4:=MA(CLOSE,60);
   
5. XG_5:=MA(CLOSE,120);
   
6. XG_6:=XG_1>XG_2 AND XG_2>XG_3 AND XG_3>XG_4 AND XG_4>XG_5 AND XG_1>REF(XG_1,1) AND XG_2>REF(XG_2,1) AND XG_3>REF(XG_3,1) AND XG_4>REF(XG_4,1) AND XG_5>REF(XG_5,1);
   
7. XG_7:=ABS(REF(OPEN,1)-REF(CLOSE,1))/REF(CLOSE,1)<0.03 AND OPEN>REF(LOW,1) AND CLOSE>REF(HIGH,1) AND CLOSE/OPEN>1.04 AND CROSS(MACD.MACD,0) AND CLOSE>MA(CLOSE,5) AND XG_6 AND 8;
   
8. XG_8:=HHV(MAX(CLOSE,0),20)/LLV(MIN(CLOSE,OPEN),20)<=1.15;
   
9. XG_9:=(HIGH-CLOSE)/CLOSE*100<1;
   
10. XG_10:=CLOSE/REF(CLOSE,1)>1.038;
    
11. XG_11:=REF(CLOSE>OPEN OR OPEN>CLOSE,43) AND REF(CLOSE>OPEN OR OPEN>CLOSE,37) AND REF(CLOSE>OPEN OR OPEN>CLOSE,16) AND REF(CLOSE>OPEN OR OPEN>CLOSE,25) AND REF(CLOSE>OPEN OR OPEN>CLOSE,29) AND REF(CLOSE>OPEN OR OPEN>CLOSE,2) AND REF(CLOSE>OPEN OR OPEN>CLOSE,24);
    
12. XG_12:=XG_7 AND XG_8 AND XG_9 AND XG_10 AND XG_11;
    
13. XG:FILTER(XG_12=1,5);
    

复制代码

注意事项：一、复制的时候注意"?"导致的错误，二、复制安装的时候出现错误提示，按错误提示找到错误代码的位置，看一下代码“AND”和“OR”是不是缺少空格